const ERR_WILDTOPLEVEL
Returned when an invalid use of "PRIVMSG $<server>" or "PRIVMSG #<host>" is attempted (when the top-l...
const ERR_TOOMANYTARGETS
Used when several targets match the given parameters for a command.
const RPL_CHANNELMODEIS
Sent in response to a MODE command or upon joining an IRC channel, containing the modes that are in e...
const RPL_SERVICEINFO
Unused numeric.
const RPL_STATSUPTIME
Reports the server uptime.
const RPL_STATSKLINE
This numeric is used for every entry configured through K-lines (ban user).
const RPL_STATSNLINE
This numeric is used for every entry configured through N-lines (accept connection).
const ERR_NOORIGIN
PING or PONG message missing the originator parameter.
const RPL_TRACECLASS
Used when tracing connections to give information on a class of connections.
const RPL_TRACECONNECTING
Used when tracing connections which have not been fully established and are still attempting to conne...
const ERR_UMODEUNKNOWNFLAG
Returned by the server to indicate that a MODE message was sent with a nickname parameter and that th...
const ERR_NOPRIVILEGES
Any command requiring operator privileges to operate will return this error to indicate the attempt w...
const RPL_NONE
Dummy reply number. Not used.
const RPL_NOWAWAY
Sent when the client sets an AWAY message.
const ERR_SERVICECONFUSED
const ERR_BANNEDFROMCHAN
Returned when trying to JOIN a channel from which you've been banned.
const ERR_NICKNAMEINUSE
Returned when a NICK message is processed that results in an attempt to change to a currently existin...
const RPL_SERVLISTEND
Marks the end of the list of services, sent in response to a SERVLIST message.
const RPL_ENDOFSERVICES
Unused numeric.
const RPL_STATSILINE
This numeric is used for every entry configured through I-lines (allow).
const RPL_STATSOLINE
This numeric is used for every entry configured through O-lines (oper).
const ERR_NOTREGISTERED
Returned by the server to indicate that the client must be registered before the server will allow it...
const ERR_PASSWDMISMATCH
Returned to indicate a failed attempt at registering a connection for which a password was required a...
Abstract class that serves as a base to create a numeric profile for an IRCd server.
const ERR_NOTOPLEVEL
Returned when an invalid use of "PRIVMSG $<server>" or "PRIVMSG #<host>" is attempted (when it doesn'...
const ERR_FILEERROR
Generic error message used to report a failed file operation during the processing of a message...
const ERR_BADCHANMASK
This numeric is sent back to you if you specify an invalid mask for a channel.
const RPL_TRACELOG
Used to indicate that TRACE information is being logged to a file on the IRC server.
const RPL_WHOISIDLE
Sent in response to a WHOIS, indicating how much time the target user has spent idle.
const ERR_BADCHANNELKEY
Returned when trying to JOIN a channel for which a key was set and was either not given or incorrect...
const RPL_TRACESERVICE
Used when tracing connections to give information on IRC services.
const ERR_UNAVAILRESOURCE
Returned when a resource needed to perform the given action is unavailable.
const RPL_TRACEOPERATOR
Used when tracing connections to give information on IRC operators.
const RPL_TRACEHANDSHAKE
Used when tracing connections which have not been fully established and are in the process of complet...
const RPL_TRACELINK
RPL_TRACELINK is sent by any server which handles a TRACE message and has to pass it on to another se...
const RPL_CREATED
Last time the IRC server was restarted.
const ERR_NEEDMOREPARAMS
Returned by the server by numerous commands to indicate to the client that it didn't supply enough pa...
const RPL_ISUPPORT
Gives information of the specific commands/options supported by the server.
const RPL_ISON
Reply format used by ISON to list replies to the query list.
const ERR_UNKNOWNCOMMAND
Returned to a registered client to indicate that the command sent is unknown by the server...
const RPL_ENDOFWHO
Marks the end of the results to a WHO.
const RPL_STATSCOMMANDS
Reports statistics on commands usage.
const RPL_AWAY
RPL_AWAY is sent to any client sending a PRIVMSG to a client which is away.
const RPL_LUSERUNKNOWN
Sent in response to a LUSERS message to indicate how many unknown connections there are...
const ERR_UNKNOWNMODE
Returned when trying to set a mode which is not recognized by the server on a channel.
const RPL_ENDOFTRACE
Alias for Erebot_Interface_Numerics::RPL_TRACEEND.
const RPL_WHOWASUSER
Sent in response to a WHOWAS, giving information on the target user.
const ERR_ERRONEUSNICKNAME
Returned after receiving a NICK message which contains characters which do not fall in the defined se...
const RPL_ADMINLOC1
Returned in response to an ADMIN message, usually giving information on the city, state and country w...
const RPL_LUSERME
In processing an LUSERS message, the server sends this numeric to indicate how many clients and serve...
const RPL_TOPIC
Sent when joining a channel or issuing a TOPIC command; contains the current topic.
const RPL_YOUREOPER
RPL_YOUREOPER is sent back to a client which has just successfully issued an OPER message and gained ...
const RPL_LISTSTART
Obsolete numeric used to mark the beginning of a reply to a LIST command.
const ERR_SERVICENAMEINUSE
const ERR_NOPERMFORHOST
Returned to a client which attempts to register with a server which does not been setup to allow conn...
const RPL_STATSLLINE
This numeric is used for every entry configured through L-lines (leaf).
const RPL_STATSDLINE
This numeric is used for every entry configured through D-lines (deny link).
const RPL_ADMINME
Returned as the first numeric in response to an ADMIN message.
const RPL_REHASHING
If the REHASH option is used and an operator sends a REHASH message, an RPL_REHASHING is sent back to...
const ERR_WASNOSUCHNICK
Returned by WHOWAS to indicate there is no history information for that nickname. ...
const RPL_UMODEIS
To answer a query about a client's own mode, RPL_UMODEIS is sent back.
const RPL_SERVLIST
When listing services in reply to a SERVLIST message, a separate RPL_SERVLIST is sent for each servic...
const ERR_NOSUCHNICK
Used to indicate the nickname parameter supplied to a command is currently unused.
Numeric profile for csircd-based IRC servers.
const RPL_LUSERCHANNELS
Sent in response to a LUSERS message to indicate how many IRC channels have been formed, if any.
const ERR_NOSUCHCHANNEL
Used to indicate the given channel name is invalid.
const RPL_WHOISOPERATOR
Sent in response to a WHOIS, indicating that the target user is an IRC operator.
const RPL_ADMINEMAIL
Returned as the last numeric in response to an ADMIN message, giving an email where the server's admi...
const RPL_STATSLINKINFO
Reports statistics on a connection.
const RPL_WHOISUSER
Sent in response to a WHOIS, giving a few information on the target user.
const RPL_TRACEUSER
Used when tracing connections to give information on (non-operator) IRC clients.
const ERR_CHANOPRIVSNEEDED
Any command requiring 'chanop' privileges (such as MODE messages) will return this error if the clien...
const ERR_NOMOTD
Server's MOTD file could not be opened by the server.
const ERR_CHANNELISFULL
Returned when trying to JOIN a channel for which a limit has been set and reached.
const RPL_TIME
When replying to the TIME message, a server MUST send the reply using the RPL_TIME format below...
const RPL_ENDOFWHOWAS
Sent in response to a WHOWAS, marks the end of the WHOWAS message processing.
const ERR_NOSERVICEHOST
This numeric is not used anymore.
const RPL_LIST
Sent in response to a LIST command, contains the actual response data.
const RPL_TRACEUNKNOWN
Used when tracing connections which have not been fully established and are unknown.
const ERR_NOTEXTTOSEND
Sent when a command did not receive any text when it was expecting some.
const RPL_KILLDONE
Unused numeric.
const ERR_YOUWILLBEBANNED
Sent by a server to a user to inform him/her that access to the server will soon be denied...
const RPL_VERSION
Reply by the server showing its version details.
const ERR_USERNOTINCHANNEL
Returned by the server to indicate that the target user of the command is not on the given channel...
const RPL_YOURHOST
Gives the name/version of the server we're connected to.
const RPL_INVITING
Returned by the server to indicate that the attempted INVITE message was successful and is being pass...
const ERR_NOOPERHOST
If a client sends an OPER message and the server has not been configured to allow connections from th...
const ERR_USERONCHANNEL
Returned when a client tries to invite a user to a channel they are already on.
const RPL_WHOISCHANOP
Redundant and not needed but reserved.
const RPL_ENDOFLINKS
Marks the end of the links for this server.
const ERR_TOOMANYCHANNELS
Sent to a user when they have joined the maximum number of allowed channels and they try to join anot...
const RPL_LISTEND
Sent in response to a LIST command, marks the end of the server's response.
const RPL_LINKS
Sent in response to a LINKS command for every server currently linked to this one that matches a give...
const ERR_NICKCOLLISION
Returned by a server to a client when it detects a nickname collision (registered of a NICK that alre...
const ERR_NORECIPIENT
Used to indicate a recipient was expected for the given command.
const RPL_STATSHLINE
This numeric is used for every entry configured through H-lines (hub).
const RPL_WHOISSERVER
Sent in response to a WHOIS or WHOWAS, indicating the IRC server the target user was connected to...
const RPL_ADMINLOC2
Returned in response to an ADMIN message, usually giving information on the institution hosting the s...
const RPL_LUSERCLIENT
In processing an LUSERS message, the server sends this numeric to indicate how many clients and serve...
const RPL_NOTOPIC
Sent when joining a channel or issuing a TOPIC command and no topic has been set yet.
const RPL_LUSEROP
Sent in response to a LUSERS message to indicate how many IRC operators are currently connected...
const RPL_ENDOFWHOIS
The RPL_ENDOFWHOIS reply is used to mark the end of processing a WHOIS message.
const RPL_SUMMONING
Returned by a server answering a SUMMON message to indicate that it is summoning that user...
const ERR_CANTKILLSERVER
Any attempts to use the KILL command on a server will be refused and this error returned directly to ...
const RPL_STATSYLINE
This numeric is used for every entry configured through Y-lines (class).
const RPL_LOAD2HI
Mostly an alias for Erebot_Interface_Numerics::RPL_TRYAGAIN, except that the text is worded slightly ...
const RPL_WHOISCHANNELS
Sent in response to a WHOIS, listing the public channels the target user is on.
const ERR_INVITEONLYCHAN
Returned when trying to JOIN a channel which requires an invitation and you've not been invited...
const RPL_NAMREPLY
This numeric is used in response to a NAMES command or upon joining a channel and contains the nickna...
const RPL_ENDOFSTATS
Marks the end of the STATS report.
const ERR_USERSDONTMATCH
Error sent to any user trying to view or change the user mode for a user other than themselves...
const ERR_NONICKNAMEGIVEN
Returned when a nickname parameter is expected for a command and isn't found.
const RPL_TRACENEWTYPE
RPL_TRACENEWTYPE is to be used for any connection which does not fit in the other categories but is b...
const RPL_STATSCLINE
This numeric is used for every entry configured through C-lines (connect).
const ERR_SUMMONDISABLED
Returned by any server which does not support the SUMMON command, either because it was not implement...
const ERR_NOSUCHSERVICE
Returned to a client which is attempting to send a SQUERY to a service which does not exist...
const RPL_TRACESERVER
Used when tracing connections to give information on IRC servers.
const ERR_USERSDISABLED
Returned by any server which does not support the USERS command, either because it was not implemente...
const ERR_NOLOGIN
Returned by the summon after a SUMMON command for a user was unable to be performed since they were n...
const ERR_NOADMININFO
Returned by a server in response to an ADMIN message when there is an error in finding the appropriat...
const RPL_USERHOST
Reply format used by USERHOST to list replies to the query list.
const ERR_YOUREBANNEDCREEP
Returned after an attempt to connect and register yourself with a server which has been setup to expl...
const RPL_SERVICE
Unused numeric.
const RPL_STATSBLINE
This numeric is used for every entry configured through B-lines (bounces).
const RPL_STATSQLINE
This numeric is used for every entry configured through Q-lines (ban nick).
const ERR_NOSUCHSERVER
Used to indicate the server name given currently doesn't exist.
const ERR_KEYSET
Sent when attempting to set a key for a channel which already has one.
const ERR_NOTONCHANNEL
Returned by the server whenever a client tries to perform a channel affecting command for which the c...
const RPL_WHOREPLY
Sent back for every user that matches the criteria for the current WHO command.
const RPL_UNAWAY
Sent went the client removes an AWAY message.
const RPL_MYINFO
Supported user and channel modes.
const ERR_CANNOTSENDTOCHAN
Sent by the server when attempting to send a PRIVMSG on a channel when you're not allowed to do so...
const RPL_YOURESERVICE
Sent by the server to a service upon successful registration.
const ERR_ALREADYREGISTRED
Returned by the server to any link which tries to change part of the registered details (such as pass...
const RPL_WELCOME
First numeric sent to a client after its connection (welcome message).